Should the cement partition board be withdrawn from the historical stage? This is the most frequently asked question from some traditional building materials companies. Then we will take a look at whether the cement partition board should be withdrawn from the historical stage. We all know that with the rapid development of modern environmentally-friendly composite wall panels, more and more engineers are slowly using environmentally-friendly lightweight partition boards as the main building materials, and cement partition panels seem to have been slowly forgotten.

  The cement partition wall board is a partition wall board directly mixed with cement and mortar. Compared with the current popular environmentally-friendly lightweight partition board, it seems that there is not much advantage, and the construction is not convenient, but there are still some traditional building materials manufacturers. It has a special liking for cement partition wall panels, because the operation of cement partition wall panels allows more construction workers to walk through the road and is easy to operate.

  The installation of the new partition wall panel is simpler and more convenient. Because it is completely dry-laid construction, the height of the wall is less than 4 meters, and an average skilled worker can ship more than 35m2 a day, and the double-sided flatness of the wallboard does not need to be plastered again. Compared with the construction of the masonry wall, the efficiency is increased by 15 times; only the line is required to be accurately installed during installation, and it can be installed regardless of the large workmanship. After the installation, other decorations can be synchronized; the wallboard can be cut according to the requirements of the building structure. The width and length are adjusted to reduce the material loss rate and construction waste; the transportation is simple, the stacking is hygienic, the mortar is not required to be laid, and the construction period is shortened.

  What is the price of cement partition board? What is the price of cement partition board now? The price of cement partition board is about 33 yuan per square meter. It seems that the price is very reasonable, but we have to calculate the cement and mortar for construction. These, the price will naturally go up!

  In this way, the cement partition board should slowly withdraw from the historical stage. Only the new lightweight partition board can be better adapted to the needs of the people and the call of the corresponding country.

  Contemporaryally, with the depletion of national resources, the global demand for new energy-saving materials is also changing. However, the most common contact between us in daily life and energy conservation is home construction, so energy conservation in the construction industry is fundamentally solving energy-saving problems. The representative new wall material is a lightweight partition board.

  [1] Lightweight partition wall panels use new environmentally friendly materials

We know that the lightweight partition board uses the modern building wall material synthesized by the environmental protection materials of the national environmental protection A-level inspection. It has many outstanding advantages and solves the problem of environmental protection wall materials from the most fundamental basis. Hubang lightweight composite energy-saving wallboard materials contain 100% of non-hazardous substances, no radioactive A-type products, in line with national JG/T169-2005 standards, and the scope of application is not subject to any restrictions. It is a green building material certified by the State Environmental Protection Administration.

  [2] Use of lightweight partition board to make better use of space

The use of lightweight interior partition panels makes better use of the space of the building itself. In this way, we can better control the utilization of other resources, and naturally better promote the national sustainable development strategy. According to the specification of the national building partition wall board, the Hubang lightweight composite energy-saving wall board 75mm thick wall board can replace the traditional 120mm thick brick wall, and the thickness is less than 85mm compared with the thickness after plastering, that is to say, using Shanghai Lightweight and energy-saving wallboards of the state can increase the use area by 1m2 for each extension of 11.8m. The utilization rate will increase by 4-6%. The residential area can increase by 4.26m2 per 100m2. The added value of the utility area is higher than the cost of wallboard, so Shanghai State Lightweight Composite Energy Saving Wall Panels are ideal for partitions or households in shops and homes.

  [3] The use of lightweight partition board is a better alternative to traditional wall materials

Lightweight partition boards have many advantages such as thermal insulation, light texture, fireproof and shockproof, which can better protect buildings and residents from protecting themselves in natural disasters, so lightweight partition boards can be better. More suitable to replace traditional building wall materials.

The "Hubang" brand lightweight energy-saving composite wallboard produced by the company is a non-load-bearing sheet made of thin fiber cement calcium silicate board as two panels and a light core material in the middle.

The product has solid, lightweight, thin body, high strength, impact resistance, strong hanging force, heat insulation, sound insulation, fireproof, waterproof, easy to cut, small weight, sound insulation and heat insulation. It is mainly used as a building. Household walls, internal partition walls and external walls, fire partitions, etc., can effectively reduce wall occupation area, improve residential utility rate, reduce structural load, improve building seismic capacity and safety performance, and reduce overall cost. It is a traditional solid clay. The best alternative to brick